Details
The Short Final Super Cub Plane Jack is the perfect tool for pilots and mechanics looking for smooth and easy lifting solutions for performing maintenance and installation in the hangar.
Instructions
|
|
Step 1: Install the clamp with the knuckle facing the rear gear tube. Square it with the front gear tube. Push it firmly in place.
|
|
|
Step 2: Install latches. Hand tightens latches using included 3/8x16x1” bolts.
|
|
|
Step 3: Attach the lifting jack to the upper tube stub. Install through pin.
|
 |
Step 4: Use a 3/4” socket to raise the jack.
|
Overview
LIFT YOUR PLANE WITH AN ELECTRIC DRILL
The Super Cub Jack integrates with any electric drill and utilizes a 3/4 socket to raise and lower your airplane.
AVOID DAMAGE AND INJURY
The Super Cub Jack attaches to the exact geometry of the PA-18 gear leg, ensuring a stable and secure fit.
Instructions
Step 1: Install the clamp with the knuckle facing the rear gear tube. Square it with the front gear tube. Push it firmly in place.
Step 2: Install latches. Hand tightens latches using included 3/8x16x1” bolts.
Step 3: Attach the lifting jack to the upper tube stub. Install through pin.
Step 4: Use a 3/4” socket to raise the jack.
Warning: Do not use in high winds. Remove or loosen tie-down ropes before lifting the aircraft. Do not use to break from ice.
This jack is designed to work with Super Cub gear, standard, 3" extended, or 6" extended gear, and comes with 1.5” and 1.375” bushings. For custom bushing offerings, please contact Short Final Fabrication at Tel:907-406-3280.
